HERMOS LFM LP Reader - Page 84

Protocol description ASCII, SECS/HSMS
Customer manual
Version 1.2
LFM LP Reader 15.01.2019
Page 84 of 119
HERMOS AG
Gartenstrasse 19 Tel. +49(9279) 991-0
D-95490 Mistelgau Fax. +49(9279) 991-100
The 2-digit TargetID (2 ascii characters decimal) is changeable and defined in parameter 12 (Head-
ID).
The 4-digit Target-ID (4 ascii characters hexadecimal) is changeable and defined in parameter 7
(TARGETID high byte) and parameter 8 (TARGETID low byte).
Example: "1707HAG04660" complete serial number
Decimal „04660“ (the last 5 characters of the complete serial number)
Hexadecimal serial number „1234“ (High byte 0x12 and Low byte 0x34)
High byte serial number 0x12 (parameter 7)
Low byte serial number 0x34 (parameter 8)
Target-ID “1234”
Where used S18F1, S18F3, S18F4, S18F7, S18F9, S18F11, S18F13