Hettich MIKRO 185 - Page 18

EN
18/38 Rev. 02 / 11.2022 AB1203EN_SA
Example:
RPM display (RPM)
Example:
RCF display (
RCF )
SELECT
 Press the key.
RPM : Speed.
RAD/mm : Centrifuging radius.
It is only possible to display and input the
centrifuging radius if the RCF display
(
RCF ) is activated.
t/min:s RPM >RCF< t/min:s RPM >RCF<

t
 Set the desired value with the keys.
t/min:s RPM >RCF< t/min:s RPM >RCF<

SELECT
 Press the key.
R : Centrifuging radius.
RCF : Relative centrifugal force
t/min:s
RPM
>RCF<

t
 Set the desired value with the keys.
t/min:s
RPM
>RCF<

SELECT
 Press the key.
DEC : Brake stage.
fast : short run-out time.
slow : long run-out time.
t/min:s RPM >RCF< t/min:s RPM >RCF<

t
 Set the desired value with the keys.
t/min:s RPM >RCF< t/min:s RPM >RCF<

START
PULSE
 Press the button to save the settings.
t/min:s RPM >RCF<
t/min:s
RPM
>RCF<