To Next PageTo Next Page
Need help?Do you have a question about the Hi-Link HLK-RM04 and is the answer not in the manual?
General| Model | HLK-RM04 |
|---|---|
| Category | Network Hardware |
| Wireless Standards | 802.11b/g/n |
| Frequency Band | 2.4 GHz |
| Frequency Range | 2.412-2.484 GHz |
| Max Data Rate | 150 Mbps |
| Operating Voltage | 3.3V |
| Operating Temperature | -20 to 70 °C |
| Storage Temperature | -40 to 85 °C |
| Interface | Ethernet |
| Ethernet Ports | 1 |
| Antenna | External |
| Power Supply | DC |
| Operating Humidity | 10% to 90%RH, Non-condensing |
| Storage Humidity | 5% to 95% RH |
| Type | Wireless Router Module |
Guide for setting up the module's IP address, subnet mask, and gateway.
Steps to configure serial port settings for network communication.
Describes the module's function for converting serial data to Ethernet, enabling TCP/IP communication.
Explains the module's operation as a client connecting to a WiFi network for data transfer.
Details the module's capability to act as a WiFi Access Point for other devices.
Covers four modes: TCP Server, TCP Client, UDP Server, and UDP Client for data conversion.
Comprehensive list of AT commands for configuring network, serial, and WiFi parameters.
