General Operations
26
5. Elevation Angle (must be in static work mode. Long press
F1 to enter elevation angle setting. Then single click F1 to
choose elevation angle. After that single click power button to
confirm. If no confirming within 10 seconds, the receiver will
automatically confirm the current settings.）:
● on ○ off
Choice
Satellite led
(green led)
Status led
(green led of dual-color led)
5 ● ○
10 ○ ●
15 ● ●
6. Collection Interval (must be in static work mode. Long
press F2 to enter collection interval setting. Then single click
F2 to choose collection interval. After that single click power
button to confirm. If no confirming within 10 seconds, the
receiver will automatically confirm the current settings.)
● on ○ off
Choice
Satellite led
(green led)
Status led
(green led of dual-color led)
1 ● ○
To Next Page
Loading...
