V30 GNSS RTK System Manual
45
Introduction
In this section, the working program and Easy of Use for
the base and rover of V30 GNSS RTK are introduced.
According to the system of V30 GNSS RTK which is required
by the customer, only the customer who buys the module can
get the relative configuration of working program and the
configuration of working program. The below is not for all the
customers who buy the system of V30 GNSS RTK. Please
refer to the relative configuration of working program for the
instrument which you buy.
Diagram for base working
Figure5-1 working mode for base with built-in GPRS/3G
Base Mainframe
Tripod
Tribrach
To Next Page
Loading...
