To o l Box Page 4-2
PLT-02496, Version: 1.0 November 2015
4.1 Configuration Tab
When ToolBox is selected on the Card tab this is the default screen that opens. See Section 3.1: Card
Tab for more information.
Field Description
Optional Printer
Features
Automatically Detect Features that are Installed in your Printer:
If selected the driver retrieves the installed printer features information from the
firmware and automatically checks the appropriate options. The features are read-only
and cannot be updated.
If selected and no printer or modules are found, an error message is displayed.
If this option is not selection, the user will select the options included in the printer.
Event Monitoring
This option enables the monitoring of events, and will notify the user when attention is
required.
Set Language Allows the user to set the printer display language from the pull-down list.
OK Closes the window and saves the configuration changes made.
Cancel Closes the window and cancels any configuration changes made.
Help Opens the Help for this window.
To Next Page
Loading...
