VertX EVO V1000 User Guide, 71000-901, Rev. A.4
Page 22 of 25 July 2016
Appendix: D VertX Installation Worksheet
This installation worksheet is provided for you to have a historical record of your system settings.
Complete each appropriate field, and keep this worksheet in a safe location.
Record if the input is wired:
1. N/O or N/C
2. Unsupervised or Supervised (resistor values)
3. What type of device is attached?
Record if output is wired:
1. N/O or N/C
2. What type of device is attached?
V1000 Information
Customer Name: Contact:
Installed Location: MAC Address:
Hostname: IP Address:
Tamper: AC Fail: BATT Fail:
Input 1: Input 2: Relay 1: Relay 2:
V100 Series Information
Interface Address: 0-31 Interface Type: V100, V200, V300
Tamper: AC Fail: BATT Fail:
V100 Door / Reader Interface
Reader 1: Reader 2:
Door Switch 1: REX 1: Door Switch 2: REX 2
Strike Relay 1: Aux Relay 1: Strike Relay 2: Aux Relay 2:
V200 Input Monitor Interface
Input 1: Input 2: Input 3: Input 4:
Input 5: Input 6: Input 7: Input 8:
Input 9: Input 10: Input 11: Input 12:
Input 13: Input 14: Input 15: Input 16:
Relay 1: Relay 2:
V300 Output Control Interface
Relay 1: Relay 2: Relay 3: Relay 4:
Relay 5: Relay 6: Relay 7: Relay 8:
Relay 9: Relay 10: Relay 11: Relay 12:
Input 1: Input 2:
To Next Page
Loading...
