10 - 48
2 PRODUCT DESCRIPTION
DDS and DCS series dehumidifiers are thought for the usage in small
swimming pools, where a 24h/day functioning is required.
Even if their typical installation is for swimming pools, the technical
characteristics of these units make them suitable also for other
applications, such as museum, archives, libraries, churches, cellars,
warehouses and, in general, for ambiences where condensate and
humidity can damage the structure and / or the product, or create
discomfort.
DDS and DCS dehumidifiers combine avant-garde technical solutions and a
sober and fine looking, so they are easily adaptable also in design and
prestigious ambiences.
The top-quality refrigeration, hydraulic, aeraulic and electrical components
make DDS and DCS units the state of the art dehumidifiers in terms of
efficiency, reliability and sound power emitted. Moreover, they have been
designed to be easily inspected and maintained.
A long list of accessories allows meeting any type of requirement and, in the event that the standard range and
available accessories are not enough to meet these demands, HiDew can offer specific solutions to the Customer.
DDS and DCS series is composed by 10 models according to the air flow rate (from 350 up to 1500 m³/h) and to the
capacity of dehumidification (from 46 up to 226 L/day). Thanks to this wide and complete range and to the great
looking, this line of products represents a reference on the market.
2.1 COMPONENTS
2.1.1 STRUCTURE
The unit is realized with an exclusive design that, when the machine is closed, grants the inaccessibility to all the
components.
The removable frontal panel grants a complete accessibility to the unit, for a simple and quick maintenance.
Bolts and screws are non-oxidable, INOX or in carbon steel with passivation treatments.
The condensate collection tank is in inox steel.
Carpentries are completely varnished with polyester powders.
Heat exchanger realized with anti-corrosion treatment.
2.1.2 REFRIGERANT CIRCUITS
The refrigerant circuit is completely realized in our Factory, using only high-quality components.
Production operators are qualified staff.
Each DDS and DCS unit is assembled, welded, wired and tested within our Factory, ad a granted high-quality product.
DDS and DCS units respond to Direction 97/23/CE. All the unit are realized with the ecological gas R410A.
Refrigerant components:
- Compressors: rotative or scroll type of primary international brand. The engines are thermally protected by an internal
protection which controls the temperature of windings and turns off the power supply if necessary.
- Dehydrater filter with molecular siever
- Thermal expansion valve or rolling organ (according to the model)
- Liquid indicator
- High pressure switch
- Schrader valves for the control of working pressure and / or the maintenance of the refrigerant circuit
- Thermal exchange coils varnished and with anti-corrosion treatment
To Next Page
Loading...
