22 - 48
3.6 TIME-BANDS MENU
You can access this menu only if the unit is set in time-bands and it allows to program the bands which manage the on/off, the
humidity and the temperature.
It is fundamental to set the current date and time, go to the screen 7 of the User Menu (additional
information in the previous chapters).
Deafult values are:
- Unit always turned on (24 h / day and 7 days / week)
- Desired humidity always ta 60% (24 h / day and 7 days / week)
- Desired temperature set all the days:
o 28°C from 08:00 to 20:00
o 25°C from 20:00 to 08:00
You can set different parameters for each hour of the day and for each day of the week.
On the left you see the screen which allows to chose what to do:
- press EXIT to exit and come back to the main screen
- press UP and DOWN to select what to do
- press OK to confirm the choice and access to the dedicated screen indicated below
The temperature program is available only if you have bought the water coil with valve or the electrical heaters.
3.6.1 ON/OFF PROGRAM- HUMIDITY PROGRAM – TEMPERATURE PROGRAM
Selecting a program you access to the programming screen; here below you find how to program the humidity:
- once entered, the first bar will flash from 00.00 to 01.00; also the set value will flash on
the right top
- on the left top you have the rectangle which indicates the day we are programming
- below the day rectangle, you find the indication of the topic you are programming:
“HUMIDITY”
- below there is the bar indicating the 24 hours
- on the left there is the bar indicating the desired humidity that can be set
KEYS USE:
- pressing OK you change the time to program
- pressing MENU you change the day to program
- pressing UP and DOWN you modify the programming of the flashing hour
- pressing EXIT you come back to the main screen
- keeping pressed OK and MENU, you copy the program of the active day to the following day
To Next Page
Loading...
