EasyManua.ls Logo

HiDew DCS 040 - Opzioni Disponibili

HiDew DCS 040
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Installation, use and maintenance manual rev00
13 - 48
2.5 OPZIONI DISPONIBILI
DDS
DCS
Standard
Control
Advanced
Control
Standard
Control
Advanced
Control
II° Advanced Display at distance
-
-
Hot water coil
Hot water coil + 3-ways valve
Electrical heaters for air heating
Silent version
Serial board Mod Bus RS 485
-
-
Mechanical Hygrostat on board
-
-
Chrono Thermo Hygrostat at distance
-
-
Supply and recovery air plenum (2 pcs)
-
-
Supply and recovery air grilles (2 pcs)
-
-
Available Option
- Not available Option
2.5.1 ADVANCED CONTROL
The Advanced control is composed by a card with a programmable micro-processor
plus a graphic display which allows several functions / options easy to manage
thanks to an intuitive and complete interface.
The management software is totally developed in HiDew by high-qualified
technician. The display can be put at a distance up to 20 meters and, thanks to the
temperature and humidity probe mounted on board, can manage temperature,
humidity and time-bands on/off of the unit.
Customized software are available under specifications and will be treated as
special executions.
2.5.2 II° ADVANCED DISPLAY AT DISTANCE
With the Advanced control, it is available a second remote display which allows to
display and set the functioning parameters of the unit. It is composed by a display
to be mounted on wall to manage the dehumidifier.
2.5.3 HOT WATER RE-HEAT COIL
S It is a reheat hot water coil which heats the supply air thanks to the hot water
coming from a boiler or from a heat pump.
2.5.4 HOT WATER RE-HEAT COIL WITH 3-WAYS VALVE
In addition to the hot water coil, the DDS and DCS can be equipped with a 3-ways
valve managed directly from the control of the unit. The contemporaneity of a 3-
ways valve and electrical heaters id possible only if combined with the Advanced
control (excluded models 040 050 060).

Related product manuals