31 - 48
7 INSTALLATION
7.1 INTRODUCTION
7.1.1 INSPECTION
When receiving the unit, please check it: the unit has left our factory after having been controlled; damages should be immediately
protested to the forwarder and noted on the Delivery Paper before signing it.
The manufacturer or his agent should be informed as soon as possible about the entity of the damage.
The Customer is supposed to fulfill a written report for every relevant damage.
7.1.2 LIFTING AND TRANSPORT
Please be careful when moving the unit and avoid sudden or harsh working during the unloading and the placement of it.
Indoor transports should be carefully conducted and the components of the unit should never be used as point of support.
When lifting the unit make sure you have well fixed it, in order to avoid overturning or accidents.
Do not use the removable panels as point of lift.
7.1.3 DEPACKING
The package of the unit should be carefully removed, trying to avoid every possible damage to the machine; the package can be of
wood, paper, nylon and other materials. It is a good habit to preserve the different packages and deliver them separately for both
the draining or the recycling, in order to reduce the environmental impact.
7.1.4 IDENTIFICATION OF THE UNIT
Each unit is characterized by an
identification label, placed on the
internal side of the electrical panel
space. Here you find all the necessary
data for installation, maintenance and
traceable of the unit.
Take note of the model, the
matriculation number, the definitive
refrigerant charge of the unit, as
reported in the table.
To Next Page
Loading...
