RS Dehumidifiers for radiant systems
27 - 52
9.2 PLACEMENT
All the RS models have been projected for an internal installation.
Do not install the unit outside and check that it is not exposed to weather agents such as rain,
humidity and frost.
Please pay attention to the following points, in order to define the most suitable place for the installation of the unit and the related
connection:
- dimensions and source of hydraulic pipes;
- place of the power supply;
- complete access for maintenance actions;
- strength of the fixing point.
Dimensions indicated are the minimum for the correct installation and manutention of the unit.
9.2.1 Clearances for RSO – RSE 020
9.2.2 Clearances for RSO – RSE 035
To Next Page
Loading...
