RS Dehumidifiers for radiant systems
9 - 52
2 PRODUCT DESCRIPTION
RSV are vertical dehumidifiers for in-wall installation, RSO – RSE are horizontal
dehumidifiers ductable for ceiling installation. They are suitable for residential and
commercial applications with a high latent load, where it is required functioning 24
h/day.
They are recommended in those buildings where cooling is realized through radiant
systems, such as floor, walls or ceilings.
RS _ A (isothermal) dehumidifiers, if correctly supplied with water at 15°C can
dehumidify the air without changing the temperature. This is possible thanks to the
presence of two heat exchangers which pre-cool the inlet air and post-cool it after the
dehumidifying process.
RS _ I (hybrid) if correctly supplied with water at 15°C can dehumidify the inlet air without changing the temperature; they have also
an ambience thermo-hygrostat and a water plates condenser, which allow the unit to supply cold air if required.
The use of exclusive high-quality refrigerant, hydraulic and electrical components make RS dehumidifiers the state of art in terms of
efficiency, reliability and sound emitted level.
2.1 SERIES
2.2 STRUCTURE
The unit is realized with pre-painted white steel panels; structural internal elements are realized in electro-galvanized steel, for a
further corrosion protection. Bolts and screws are made of non-oxidable material, INOX or carbon steel with superficial treatment of
passivation. Panels are covered with synthetic open-cells polyurethane material, in order to ensure the maximum phono-absorbent.
The unit is completely closed and the access is possible only from the front panel for vertical models and from the side for the
horizontal ones. The access to the compressor area is easier thanks to the removable panel, which allows operations without
obstacles.
To Next Page
Loading...
