EasyManua.ls Logo

Hidrostal A2Q - Biohazards; Hazards from electric energy

Default Icon
49 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2 | Safety requirements
12 / 49 Hidrostal AG
WARNING
Flying parts when cleaning with a high-pressure cleaner.
Risk of severe injury!
Wear safety goggles.
CAUTION
Wood splinters and nails on packaging material.
Risk of injury!
Wear safety gloves.
2.6.2 Biohazards
WARNING
Contact with infectious substances.
Risk of severe illness!
Obtain binding information about the hazards relating to the medium from
the operator of the plant.
Wear personal protective equipment.
Thoroughly clean the pump.
Carefully dispose of liquid drained from the oil chamber.
Thoroughly clean tools after use.
2.6.3 Hazards from electric energy
DANGER
Contact with live parts.
Damaged cable insulation
Risk of fatal injury!
In case of damaged insulation, disconnect the power supply immediately
and have it repaired.
Before connecting the machine to the power supply, compare the
specifications Type plate [16] with those of the grid and only connect
if they are identical.
Any work on the electrical system must be performed by authorised
electricians.

Table of Contents