Hidrostal A2Q - Maintenance; Maintenance schedule

Maintenance | 8
Hidrostal AG 29 / 49
8 Maintenance
WARNING
Unsafe behaviour.
Incorrect operation because of insufficient qualifications and knowledge.
Risk of severe injury!
• Observe the information and personnel requirements in chapter Safety
requirements [▶8].
WARNING
Contact with infectious substances.
Risk of severe illness!
• Obtain binding information about the hazards relating to the medium from
the operator of the plant.
• Wear personal protective equipment.
• Thoroughly clean the pump.
• Carefully dispose of liquid drained from the oil chamber.
• Thoroughly clean tools after use.
WARNING
Work at the pump location, noise from neighbouring pumps, tank
overflowing.
Risk of injury!
Risk of permanent health damage!
• Always wear hearing protection near running pumps.
• Before entering a tank, make sure at the control console that the tank will
not be flooded during the work.
8.1 Maintenance schedule
Interval Maintenance work Personnel
initially after approx.
1000oh (operating
hours)
Check pump for damage, see chapter Visual inspection
[▶31]
Instructed persons
(operators)
Check oil level, see chapter Checking the oil [▶35] Trained personnel
annually Check pump for damage, see chapter Visual inspection
[▶31]
Instructed persons
(operators)
Check the electric motor, motor cover, cable inlet and
cable for any damage and resistance-free connection, see
chapter Visual inspection [▶31]
Qualified electricians