EasyManua.ls Logo

Hidrostal A2Q - Packages with anchor points; Pallet transport by forklift

Default Icon
49 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5 | Transport and storage
24 / 49 Hidrostal AG
Protect the packaging against water and keep dry.
Indicates packages that cannot be stacked.
5.1.2 Packages with anchor points
Packages which have anchor points can be transported directly by crane
under the following conditions:
The crane and lifting gear must be designed for the weight of the
transported item.
The operator must be authorised to operate the crane.
Protective equipment:
Hard hat
1. Fasten belts or multiple-point suspension gear appropriately.
2. Make sure that the transported item is hanging straight, check if the
package has an off-centre centre of gravity.
3. Start the transport.
5.1.3 Pallet transport by forklift
Packages that are fastened on pallets can be transported by forklift under
the following conditions:
The forklift must be designed for the weight of the transported item.
The transported item must be securely fastened to the pallet.
Personnel:
Forklift drivers
1. Drive the forklift with the forks in between the pallet deck-boards.
2. Drive the forks in far enough that they protrude on the opposite side.
3. Ensure that the pallet cannot tip as a result of an off-centre centre of
gravity.
4. Lift the pallet with the transported item and start the transport.

Table of Contents