5. Servo operating
5-4
5.2.3 Alarm related processing part
1) Currently generated alarm display menu
ENTER : Indicated generated alarm value
ENTER
In case of
over-current
alarm
In case of normal condition
after removing alarm cause
and resetting
Currently generated alarm display menu shows the currently generated alarms. Even though it
is free to move to the next menu, the alarm cannot be reset and the motor cannot be operated.
2) Alarm reset menu
UP : ON/OFF change
DOWN : ON/OFF change
LEFT : Move menu
RIGHT : Move menu
ENTER : Start and end of parameter change (Current alarm cancel function operation)
ENTER
ENTER
UP
ENTER
Return to
“OFF” after
resetting
As the function to reset the alarm generated in the current system, the alarm reset menu is the
same function as external input reset.
To Next Page
Loading...
Need help?
General
