HikRobot ID3000 Series - 3.2 Output Signal

ID3000 Series Smart Code Reader User Manual
7
Table 3-1 Input Electrical Feature
Parameter Name
Parameter Symbol
Value
Input Logic Level Low
VL
0 VDC to 9 VDC (VCC=24 VDC)
0 VDC to 5.4 VDC (VCC=12 VDC)
Input Logic Level High
VH
11 VDC to 24 VDC (VCC=24 VDC)
7.56 VDC to 12 VDC (VCC=12 VDC)
Input Falling Delay
TDF
1.3 μs to 3.5 μs
Input Rising Delay
TDR
1.3 μs to 3.5 μs
Note
VCC stands for Volt Current Condenser, and it is the device's input voltage.
3.2 Output Signal
The device's LineOut 0/1/2 are output signals, and their internal circuit is as follows.
Note
The maximum output current of output signal is 200 mA.
Figure 3-3 Internal Circuit of Output Signal