HikRobot ID3000 Series - Set Light Source

ID3000 Series Smart Code Reader User Manual
26
Figure 8-3 Multiple Mode
Parameter 1
Exposure Time 1
Gain 1
Gamma 1
Lighting 1
Parameter 2
Exposure Time 2
Gain 2
Gamma 2
Lighting 2
Parameter 3
Exposure Time 3
Gain 3
Gamma 3
Lighting 3
Parameter 4
Exposure Time 4
Gain 4
Gamma 4
Lighting 4
Parameter 8
Exposure Time 8
Gain 8
Gamma 8
Lighting 8
Parameter 7
Exposure Time 7
Gain 7
Gamma 7
Lighting 7
Parameter 6
Exposure Time 6
Gain 6
Gamma 6
Lighting 6
Parameter 5
Exposure Time 5
Gain 5
Gamma 5
Lighting 5
Figure 8-4 Polling Diagram
8.1.3 Set Light Source
You can select different light types, and set their related parameters in the light interface.
Note
● Light source parameters may differ by device models.
● Make sure you have selected the device to be set in Device Connection before setting light
source parameters.
You can select different light sources in Light Type.