ID3000 Series Smart Code Reader User Manual
79
Note
The Default refers to restore the device parameter settings to the factory ones.
Start Settings
The selected user set will be automatically loaded after the device being powered on. For
example, if you select Default, the device parameter settings will be restored to the factory
settings.
Figure 8-62 User Set Customization
8.9 Statistics Information
The statistics information in the feature tree helps you to count data related with code reading.
Note
You need to set device mode as Normal before using this function.
Go to feature tree, find Statistics Info., and select Statistics Mode according to actual demands.
Two statistics modes are available:
All Frames means that the client software will display all data since the device is powered on.
Latest Frames means that the client software will display data of the last 10 frames.
Refer to the table below for specific parameters.
Table 8-1 Parameter Description
To Next Page
Loading...
