ID3000 Series Smart Code Reader User Manual
82
Chapter 9 Device Operation
The device operation section introduces some basic device operations about how to start live
view, acquisition and recording, add cross line in the image, split window, view reports, etc.
Note
Connecting the device to the client software is required before device operation.
9.1 Live View
You can view the real-time image in the live view window.
Click in live view window to start live view, or click to stop.
Figure 9-1 Live View
9.2 Enable Acquisition
Enabling acquisition allows the device to acquire the real-time stream.
Click in live view window to start acquisition, or click to stop. You can also right click the
device on the device list, and click Stop Acquisition to stop acquiring streams.
Note
Acquisition is still going on if you only stop live view.
To Next Page
Loading...