ID3000 Series Smart Code Reader User Manual
89
Chapter 11 FAQ (Frequently Asked Question)
11.1 Why the image is very dark?
Problem
All black or too dark during preview.
Reason
●
Insufficient brightness of supplement light.
●
Too small adjustment value of exposure and gain.
●
The polarization lens cap may be used. The brightness of polarization lens cap is low, and it is not
recommended to use it in normal condition.
Solution
●
Increase the brightness of supplement light appropriately, or change to a brighter one. Increase
exposure and gain appropriately.
●
Increase exposure and gain appropriately.
11.2 Why the image's frame rate is very low in the live view?
Problem
Image incoherent/Low frame rate/Image tearing when adjusting the view preview.
Reason
Network circuitry speed is not 100 Mbps.
Solution
Check whether network transit speed is 100 Mbps or not.
11.3 Why there is no device listed after I run the IDMVS client
software?
Problem
Run IDMVS client, there is no listed device.
To Next Page
Loading...