HikRobot SC2000 Series - Page 12

SC2000 Series Vision Sensor User Manual
3
No.
Name
Description
5
Light Source
The device has 8 LED lamps providing light, and the light source is
white spotlight by default. You can select wide-angle or spotlight
lamp, and white, red, blue or near-infrared is optional.
6
Screw
It refers to the screw between device body and lens cap.
7
Screw Hole
It is used to fix the device to installation position. You should use
M4 screw.
8
PWR Indicator
It is the power indicator. The indicator is green when the device
operates normally. Otherwise, it is red.
9
STS Indicator
It is the status indicator. The indicator is green when the solution
operates normally. Otherwise, it is red.
10
LNK Indicator
It is network status indicator. The indicator is flashing green when
the network transmission is normal. Otherwise, it is unlit.
11
Button
It is used to trigger device solution operation.