SC2000 Series Vision Sensor User Manual
45
Figure 7-26 Color Extraction
7.4.14 Color Measurement
Note
This tool is available for color vison sensors only.
This tool is used to measure the color information in the specified area of the color image, including
the max. value, min. value, mean value, and standard deviation of each channel.
You should select RGB, HSV or HSI as Color Space when using the color measurement tool.
7.4.15 Color Conversion
Note
This tool is available for color vison sensors only.
This tool is used to convert the color space in the specified area of the color image, and output the
gray image of this area after color conversion.
Select Input Source, and select RGB2GRAY, RGB2HSV or RGB2HSI as Conversion Type according to
actual demands. If RGB2GRAY is selected as Conversion Type, you can set Conversion Ratio that
includes General Ratio, Average Ratio, Channel Min, Channel Max, User Ratio, R Channel, B Channel,
and G Channel.
To Next Page
Loading...
