SC2000 Series Vision Sensor User Manual
16
Chapter 7 Solution Settings
The vision sensor is able to acquire, process and output images. You can log in the web interface
to set camera parameters, tool parameters, output parameters, etc. After competing related
settings, you can save and download the solution you configured.
Note
The specific parameter names and values may differ by device models and firmware versions.
7.1 Camera Settings
7.1.1 Set Frame Rate
Go to Frame Rate to set frame rate and view actual frame rate.
Note
● The actual frame rate is related with the exposure time. If the exposure time is larger than the
reciprocal of the device’s max. frame rate, the less the exposure time, and the higher the frame
rate will be. If the exposure time is smaller than the reciprocal of the device’s max. frame rate,
and then the exposure time will not influence the actual frame rate.
Figure 7-1 Set Frame Rate
To Next Page
Loading...
