SC2000 Series Vision Sensor User Manual
66
Figure 9-5 Time Synchronization
9.5 System Maintenance
System maintenance allows you to update firmware, restore factory, and reboot device.
Firmware updating allows you to view current device firmware version, and update firmware.
Note
● Make sure the device and solution stop operation when updating the firmware.
● After updating, the device will automatically reboot, and the web will automatically jump to
login interface.
● Only the admin can update firmware and restore factory.
You can select update file from the local PC, and click OK to update firmware.
Figure 9-6 Update Firmware
If you want to restore the device to factory settings, enter Admin Password and click OK.
To Next Page
Loading...
