HikRobot SC2000 Series - Chapter 2 Appearance

SC2000 Series Vision Sensor User Manual
2
Chapter 2 Appearance
Figure 2-1 Appearance
Table 2-1 Description
No.
Name
Description
1
17-Pin Interface
It provides power, input/output, Ethernet, and serial port signal.
The interface is designed with screw threads to tighten
connection between the device and cable, and thus avoiding
influence caused by vibration.
2
Focus Knob
It is used to adjust focal length manually.
3
OK/NG Indicator
It indicates the result of solution.
● The green indicator lights when the solution result is OK.
● The red indicator lights when the solution result is NG.
● When switching solutions, the indicators both light. After
switching, the indicators both are unlit.
4
Lens Cap
It can be replaced with other lens cap. Polarization lens cap is
optional.