SC2000 Series Vision Sensor User Manual
65
image related parameters.
There are 2 ways to import test images, uploading local images and importing camera images.
Click Upload Local Image to upload images from the local PC, and images of RAW, BMP and JPEG
format are supported. You can also compress image into ZIP format and upload it. Or click Import
Camera Image to import camera images into the test library.
After importing images, you can select image types, click Search to search images, or click Reset to
reset image types.
You can enable All to let all searched imaged be used as test images, or enable images separately
to be used as test images. After that, you should enable Image Test and the device will use the
images you selected to run solutions.
Figure 9-4 Test Library Management
9.4 Synchronize Time
Time synchronization allows you to synchronize device time with that of local PC or server. It
consists of auto mode by Network Time Protocol (NTP) server and manual mode.
Steps
1. Click System → Time Sync.
2. Select time synchronization method.
– Click Manual, select date and time from the calendar, or check Sync. With PC to synchronize
the time of the device with that of the local PC.
– Click NTP, enter Server Add., NTP Port, and Interval (Hour).
3. Click Save.
To Next Page
Loading...
