HikRobot SC2000 Series - 4.2 Output

SC2000 Series Vision Sensor User Manual
7
Table 4-1 Input Electrical Feature
Parameter Name
Parameter Symbol
Value
Input Logic Level Low
VL
0 VDC to 9 VDC (VCC=24 VDC)
0 VDC to 5.4 VDC (VCC=12
VDC)
Input Logic Level High
VH
11 VDC to 24 VDC (VCC=24
VDC)
7.56 VDC to 12 VDC (VCC=12
VDC)
Input Falling Delay
TDF
1.3 μs to 3.5 μs
Input Rising Delay
TDR
1.3 μs to 3.5 μs
Note
● VCC stands for Volt Current Condenser, and it is the device's input voltage.
● The breakdown voltage is 36 VDC, and keep voltage stable.
4.2 Output
The device's Line 5/6/7 are outputs, and Line 2/3/4 are bi-directional I/O that can be set as
outputs. The type of output signal can be set as PNP or NPN via web parameter. When the output
signal is PNP or NPN, the respective internal circuit is as follows.
Note
The maximum output current of output signal is 200 mA.