SC2000 Series Vision Sensor User Manual
53
It sets output signal as NPN Mode or PNP Mode.
Figure 7-36 IO Communication
In display interface, enable Display Text to set text's color, front size, transparency, position X, and
position Y.
7.5.6 FTP
In FTP communication, set the image file of the device as Image Source, and set the previous
module status as Input Status.
When using FTP as communication tool, you need to set target IP, target port, user name,
password, image saving, frame index, result, start tag and end tag, and separator according to
actual solution demands.
Target IP and Port
It refers to the IP and Port of FTP server.
User Name
Enter user name to log in FTP.
Password
Enter password to log in FTP.
Image Saving
It sets when to save images. It includes Not Save Image, Save Image (OK), Save Image (NG), and
Save Image (OK&NG).
Frame No.
If you use image saving function, you can enable frame index to save the image frame number.
Result
If you use image saving function, you can enable result to link input status result.
To Next Page
Loading...
