34
3. (Optional) You can click to cancel the deletion.
Controlling the Front Panel of Added DVR/NVR by the Admin
Purpose:
The keyboard can control the front panel of the added DVR/NVR.
Steps:
1. Click the added DVR/NVR in the Device Management interface. A pop-up box is shown in Figure 4.12.
Figure 4.12 Editing the Added DVR/NVR
2. Select Control to enter the Remote Panel.
Figure 4.13 DVR/NVR Remote Panel
3. Click the buttons on the control panel to control the front panel of the added DVR/NVR.
4. Click to exit from the DVR/NVR Control Panel.
You can also view the details of, refresh, delete and clear the added DVR/NVR. Refer to Editing the
Device by the Admin for reference.
To Next Page
Loading...
