Control Panel User Manual
108
receiving center.
5. Enter the port No. for communicating with the alarm-receiving center.
6. Click the dropdown menu to select the protocol type.
7. Enter the username that is applying for displaying in the alarm-receiving
center.
The length of the username should be 6 characters.
Only numeric (0~9), and letter (A~F&a~f) are valid for this username.
Dialing Center Configuration
Purpose:
You can configure the parameters(such as report uploading time period, center
name, phone number and so on) for each dialing center in this section.
Steps:
1. Enter the dialing center configuration page.
Remote Configuration->Dialing Parameters
To Next Page
Loading...
