Control Panel User Manual
113
Steps:
1. Enter the partition alarm triggering configuration interface.
Remote Configuration->Alarm->Partition
2. Click the partition dropdown menu to select a partition.
3. Click the Linkage button to add required Zone, keypad, or keypad user to the
partition.
4. Check the check box of Enable Partition or Public Partition to enable
functions of the partition or set the system as a public system.
5. Enter the Entering Delay and Existing Delay duration (unit: second).
6. Enter the siren-delay time (unit: second). The siren-delay time represents the
duration of siren ringing when the alarm of the partition is triggered.
7. Click Edit to edit the arming schedule. Select the alarm type.
To Next Page
Loading...
