Control Panel User Manual
114
8. Select an alarm type.
Hostage Report: Enable uploading the hijack report of control panel.
Arming/Disarming Report Uploading Sound: Enable the prompt sound
when uploading the arming/disarming report.
Alarm Sound Uploading Manual Test: Enable the prompt sound when
successfully uploading the manual test report.
Arming Partition in Key switch Zone: Support the key Zone to arm the
current partition
Send Report when Arming Key Switch Zone: Enable uploading report
when the key Zone arms the current partition.
Disarming Partition in Key switch Zone: Support the key Zone to disarm
the current partition
Send Report when Arming Key Switch Zone: Enable uploading report
when the key Zone disarms the current partition.
9. Click Apply to save the settings.
Zone Configuration
Steps:
1. Enter the Zone configuration interface.
Remote Configuration-> Alarm-> Zone
To Next Page
Loading...
