Control Panel User Manual
118
3. Edit the general information of the zone, including name, output delay and so
on.
Output Delay (0~5999s): Configure the alarm output time after the alarm
being triggered.
4. Click the dropdown menu to enable/disable the event-linked trigger.
5. Select the detailed operation after the alarm being triggered on the partition
event panel.
6. Select the global event of alarm triggering.
7. Click Copy to to copy all these settings to other Zones.
8. Click Apply to save the settings.
Siren Configuration
Steps:
1. Enter the siren configuration page.
Remote Configuration->Alarm->Siren
To Next Page
Loading...
