Control Panel User Manual
119
2. Click the Siren dropdown menu to select a siren needs to be configured.
3. Check the Enable box to enable the configuration.
4. Edit the siren name.
5. Select the detailed operation after the alarm being triggered on the partition
event panel.
6. Select the global event of alarm triggering.
7. Click Apply to save the settings.
Relay Output Schedule Configuration
Purpose:
You can set the schedule for turning on/off the relay in this section.
Steps:
1. Enter the relay output schedule configuration interface.
Remote Configuration->Alarm-> Output Schedule Rule
To Next Page
Loading...
Need help?
General
