Control Panel User Manual
58
{2} The Tens’ Digit of the Partition No.
{3} The Units’ Digit of the Partition No.
{4} Ac Power Down
{5} Low Battery
{6} Control Panel Tampering Alarm
{7} Phone Line Disconnection
{8} Main keypad Disconnection
{9} Neywork Exception
{10} GPRS Exception
{11} End the command.
Partition Fault Prompt Sound Configuration
To configure the partition fault prompt sound, please see the command below.
568 01 01 1 1 1 1 1 1 1 #
1 2 4 63 5
7 8
9
10
11
{1} Partition fault display configuration programming address: 568.
{2} The Tens’ Digit of the Partition No.
{3} The Units’ Digit of the Partition No.
{4} Ac Power Down
{5} Low Battery
{6} Control Panel Tampering Alarm
{7} Phone Line Disconnection
{8} Main keypad Disconnection
{9} Network Exception
{10} GPRS Exception
To Next Page
Loading...
