Control Panel User Manual
57
Keypad Fault Prompt Sound Configuration
To configure the keypad fault prompt sound, please see the command below.
566 1 1 1 1 1 1 1 #
1 2 4
6
3
5
7 8
9
{1} Keypad fault prompt sound configuration programming address:
566.
{2} Ac Power Down
{3} Low Battery
{4} Control Panel Tampering Alarm
{5} Phone Line Disconnection
{6} Main keypad Disconnection
{7} Network Exception
{8} GPRS Exception
{9} End the command.
After successfully operating once, you can continuously do configuration with
the command of {Project} + {Partition No.} + {Configuration} + {#}.
Partition Fault Display Configuration
To configure the partition fault display, please see the command below.
567 01 01 1 1 1 1 1 1 1 #
1 2 4 63 5
7 8
9
10
11
{1} Partition fault display configuration programming address: 567.
To Next Page
Loading...
