Control Panel User Manual
66
{3}~{10} Enable/Disable the Permission of Partition Disarming
{11} Completing
Partition Alarm Clearing Permission Configuration
To configure the permission of partition alarm clearing, please refer to the
command below.
683 00 0 0 0 0 0 0 0 0 #
1
2 4 63 5
87
9
10
11
{1} Partition Alarm Clearing Permission Configuration Command
Address: 683
{2} White List Number. 01~08 indicate white list No.1~No.8.
{3} The Alarm Clearing Permission of Partition 1
{4} The Alarm Clearing Permission of Partition 2
{5} The Alarm Clearing Permission of Partition 3
{6} The Alarm Clearing Permission of Partition 4
{7} The Alarm Clearing Permission of Partition 5
{8} The Alarm Clearing Permission of Partition 6
{9} The Alarm Clearing Permission of Partition 7
{10} The Alarm Clearing Permission of Partition 8
{3}~{10} Enable/Disable the Permission of Partition Alarm Clearing
{11} End the command.
To Next Page
Loading...
Need help?
General
