Control Panel User Manual
67
The Interval Time of Whitelist Configuration
To configure the interval time of white list, please refer to the command
below.
684 01 0 0 0 0 0 #
1 2 3 54 6 87
{1} The interval time of White List Configuration Command Address:
684.
{2} White List Number. 01~08 indicate white list No.1~No.8.
{3} Interval Time. The command is shown below.
{4} The user defined interval time: Thousands’ Digit
{5} The user defined interval time: Hundreds’ Digit
{6} The user defined interval time: Tens’ Digit
{7} The user defined interval time: Digit
{4}~{7} Valid only when {3} is 6.
{8} End the command.
Handset Number Settings
To configure the handset number, please refer to the command below.
685 01 1 E0 ∙∙∙∙∙∙0 #
1 4 5
2 3
{1} Handset Number Command Address: 685.
{2} White List Number. 01~08 indicate white list No.1~No.8.
To Next Page
Loading...
