Control Panel User Manual
73
{3} It indicates to enable/disable the mandatory arming/disarming.
{4} It indicates to enable/disable the prior schedule.
{5}~{12} It indicates the start date and end date.
Start Date: {5}{6}/{7}{8}. The former is the month (value
range 1~12), while the latter is the day (value range 1~30).
End Date: {9}{10}/{11}{12}. The former is the month (value
range 1~12), while the latter is the day (value range 1~30).
{5} End the command.
Enabling Prior Schedule
To enable the prior schedule, please refer to the command below.
695 00 0 0 0 0 0 0 0 0 #
1
2 4 63 5
87
9
10
11
{1} Enabling Prior Schedule Command Address: 695.
{2} It indicates the prior schedule number. 01~30 indicate prior
schedule No.1~No.30.
{3} Partition 1
{4} Partition 2
{5} Partition 3
{6} Partition 4
{7} Partition 5
{8} Partition 6
{9} Partition 7
{10} Partition 8
{3}~{10} It indicates to enable/disable prior schedule of Partition
To Next Page
Loading...
