HIKVISION DS-19A08-F/Kx - Page 76

Control Panel User Manual
76
698 0 0 0 0 #
1 2 4 63 5
{1} Trigger Schedule Trigger Parameter Configuration Command
Address: 698.
{2} It indicates to delete/add the trigger schedule.
Command
Command
Description
Command
Command
Description
0
Delete
1
Add
{3} Trigger No.: Hundreds’ Digit
{4} Trigger No.: Tens’ Digit
{5} Trigger No.: Digit
{6} End the command.
Trigger Schedule Time Parameter Configuration
To configure the time parameters of the trigger schedule, please refer to the
command below.
699 0 0 0 0 0 0 0 0 0 E #
1
2 4 63 5
87
9
10
11 12
{1} Trigger Schedule Time Parameter Configuration Command Address:
699.
{2} It presents the time bucket composed by {3}~{10}. The value range
is 1~8.
{3}~{10} It indicates the start time and end time during the time bucket
of {2}.
Start Time: {3}{4}:{5}{6}
End Time: {7}{8}:{9}{10}