Need help?Do you have a question about the HIKVISION DS-2CD6362F-I and is the answer not in the manual?
General| Type | IP security camera |
|---|---|
| PTZ control | Yes |
| Placement supported | Indoor |
| Connectivity technology | Wired |
| Form factor | Dome |
| Mounting type | Ceiling/wall |
| Product color | White |
| Total megapixels | 6 MP |
| Maximum resolution | 3072 x 2048 pixels |
| Supported video modes | - |
| Video formats supported | H.264, M-JPEG |
| Supported graphics resolutions | 1024 x 768 (XGA), 2048 x 1536 (QXGA) |
| Camera shutter speed | 1/25 - 1/100000 s |
| Minimum illumination | 0.3 lx |
| Field of view (FOV) angle | 360 ° |
| Sensor type | CMOS |
| Optical sensor size | 1/1.8 \ |
| Optical zoom | - x |
| Focus adjustment | 2.8 |
| Fixed focal length | - mm |
| Password protection type | User |
| Compatible memory cards | MicroSD (TransFlash), MicroSDXC |
| Maximum memory card size | 64 GB |
| LED type | IR |
| Night vision distance | 15 m |
| Wi-Fi | No |
| Cabling technology | 10/100/1000Base-T(X) |
| Supported network protocols | TCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTC P, PPPoE, NTP, UPnP, SMTP, SNMP, IGMP, 802.1X, QoS, IPv6, Bonjour |
| Ethernet LAN (RJ-45) ports | 1 |
| Signal-to-Noise Ratio (SNR) | 120 dB |
| DC output voltage | +12V |
| Power source type | PoE |
| Power consumption (max) | 11 W |
| Operating temperature (T-T) | -10 - 60 °C |
| Operating relative humidity (H-H) | 0 - 95 % |
Weight and Dimensions| Depth | 152.8 mm |
|---|---|
| Width | 164 mm |
| Height | 43.8 mm |
| Weight | 1400 g |
Guidelines and precautions for safe operation and installation of the camera.
Specifies the hardware and software needed to operate the network camera.
Instructions for configuring the camera within a Local Area Network.
Describes the physical cable connections for LAN setup.
Steps to find and assign an IP address to the network camera.
Instructions for configuring the camera for Wide Area Network access.
Details on connecting the camera using a fixed IP address.
Details on connecting the camera using a dynamically assigned IP address.
Guide on how to access the camera's interface using a web browser.
General network configuration options for the camera.
Overview of how the camera responds to various alarm events.
General maintenance operations for the camera.
To Next Page
