Installation Manual of Network Camera
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
Note:
1. As the lens of camera has already been factory adjusted to the best imaging effect, thus it only
needs to adjust the pan and tilt view angle.
2. If the image is not clear without the back box, please don’t worry, the back box will affect the
imaging effect, so when you test the imaging effect of lens, the back box must be installed to the
camera
Step 4: Install the back box, and tighten the set screws.
Figure 3.5.7 Install the back box
Figure 3.5.8 Done
To Next Page
Loading...
Need help?
General
