Chapter 1 Introduction
Network camera is a kind of embedded digital surveillance product that combines the features
of both traditional analog camera and net DVS (Digital Video Server). Due to the embedded Linux
operation system and the latest Davinci hardware platform of TI, the system operates with high
scheduling efficiency. Furthermore, the firmware is burned in the flash, which makes the product
small, reliable and highly stable.
1.1 Network camera Functions and Features
Functions:
Advanced compression with high compression ratio.
Heartbeat Function: The server can acquire real time operating performance of the network
camera through the heartbeat function.
Two way audio.
Alarm Function: Motion detection, Video tampering, Network disconnect , IP address conflict,
Storage exception.
Support reset button, dual stream, mobile phone surveillance.
User Management: Support multilevel right management. The administrator can create up to
15 separate users with different right levels, which highly improves the system security.
Build-in WEB browser and support IE browsing.
Software Development Kit (SDK) is available.
Compression Functions:
Support 1 channel video signal and standard H.264 encoding compression, which supports both
variable bit rate and variable frame rate; besides, you can self-define both the video quality and
its compressed bit rate.
Remote Control:
The product offers a 10M/100M self-adaptive Ethernet interface.
Support TCP/IP, HTTP, DHCP, DNS, DDNS, RTP/RTSP, PPPoE, SMTP, NTP protocols.
Set the parameters, browse real time videos or check the camera performance through
software or IE, and store the compressed bit rate through network.
Support remote upgrades and maintenance.
1.2 Applications
This camera is ideal for remote control network applications. E.g.:
1. Network surveillance for bank counters, supermarkets and factories.
To Next Page
Loading...
Need help?
General
