EasyManuals Logo

HIKVISION DS-2TD2637T-7/P User Manual

HIKVISION DS-2TD2637T-7/P
106 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #63 background imageLoading...
Page #63 background image
Reect Light Filter
Enable these funcons if there is strong reected light from sun, or it may cause false alarm.
The lter sensivity can be adjusted.
Check Display Filtering Status, and an OSD will be displayed when the funcon is enabled.
Click Restart to restart the algorithm library of reect light lter.
Forkli Filter
Enable these
funcons if there are forklis in the scene, or it may cause false alarm.
Select Filter Level to lter dierent objects in the detecon scene. High Temperature Object
in the high level means the object whose tempereture is higher than the pre-alarm
threshold/temperature.
Check Display Filtering Status, and an OSD will be displayed when the
funcon is enabled.
Click Restart to restart algorithm library of forkli lter.
Note
The Forkli Filter varies according to dierent camera models.
Reect Light Filter and Forkli Filter are mutually exclusive with VCA funcons.
4.
Click Save.
Set Normal Mode
This funcon is used to measure the temperature of the whole scene and alarm.
Steps
1.
Go to
Conguraon → Temperature Measurement & Fire Prevenon → Basic Sengs , and
check Enable Temperature Measurement.
2.
Refer to Set Thermography Parameters to set the parameters.
3.
Go to
Conguraon → Temperature Measurement & Fire Prevenon → Advanced Sengs ,
and select Normal.
4.
Congure the parameters of normal mode.
Emissivity
Set the emissivity of your target. The emissivity of each object is dierent.
Distance
The distance between the target and the device.
Pre-Alarm Threshold and Filtering Time
When the temperature of target exceeds the Pre-Alarm Threshold and this status lasts not
shorter than the Filtering Time, the pre-alarm is triggered.
Alarm Threshold and Filtering Time
When the temperature of target exceeds the Alarm Threshold, and this status lasts not
shorter than the Filtering Time, the alarm is triggered.
Thermal Opcal Bi-spectrum Network Camera User Manual
48

Table of Contents

Other manuals for HIKVISION DS-2TD2637T-7/P

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-2TD2637T-7/P and is the answer not in the manual?

HIKVISION DS-2TD2637T-7/P Specifications

General IconGeneral
BrandHIKVISION
ModelDS-2TD2637T-7/P
CategorySecurity Camera
LanguageEnglish

Related product manuals