HIKVISION DS-2TD2637T-7/P User Manual

●
The interface varies with the models. Please refer to the product datasheet for details.
●
If the device needs to be wired by yourself, select the corresponding wire to supply power
according to the electric parameters labeled on the device. Strip o wire with a standard wire
stripper at corresponding
posion. To avoid serious consequences, the length of stripped wire
shall be appropriate, and conductors shall not be exposed.
●
Make sure that the power has been disconnected before you wire, install, or disassemble the
device.
System Security
●
You acknowledge that the nature of Internet provides for inherent security risks, and our
company shall not take any responsibilies for abnormal operaon, privacy leakage or other
damages
resulng from cyber aack, hacker aack, however, our company will provide mely
technical support if required.
●
Please enforce the protecon for the personal informaon and the data security as the device
may be confronted with the network security problems when it is connected to the Internet.
Please contact us when the device might exist network security risks.
●
Please understand that you have the responsibility to congure all the passwords and other
security sengs about the device, and keep your user name and password.
Maintenance
●
If the product does not work properly, please contact your dealer or the nearest service center.
We shall not assume any responsibility for problems caused by unauthorized repair or
maintenance.
●
A few device components (e.g.,
electrolyc capacitor) require regular replacement. The average
lifespan varies, so periodic checking is recommended. Contact your dealer for details.
●
Wipe the device gently with a clean cloth and a small
quanty of ethanol, if necessary.
●
If the equipment is used in a manner not specied by the manufacturer, the protecon provided
by the device may be impaired.
●
To reduce the risk of
re, replace only with the same type and rang of fuse.
●
The serial port of the equipment is used for debugging only.
Using Environment
●
Make sure the running environment meets the requirement of the device. The operang
temperature shall be -40°C to 65°C (-40°F to 149°F), and the operang humidity shall be 95% or
less, no condensing.
●
DO NOT expose the device to high
electromagnec radiaon or dusty environments.
●
DO NOT aim the lens at the sun or any other bright light.
●
The equipment shall not be exposed to dripping or splashing and that no objects
lled with
liquids, such as vases, shall be placed on the equipment.
●
No naked
ame sources, such as lighted candles, should be placed on the equipment.
●
For the device with venlaon openings, the venlaon openings should not be impeded by
covering the
venlaon openings with items, such as newspapers, table-cloths, and curtains.
Thermal Opcal Bi-spectrum Network Camera User Manual
vi

HIKVISION DS-2TD2637T-7/P Specifications

General

Brand	HIKVISION
Model	DS-2TD2637T-7/P
Category	Security Camera
Language	English