Wireless Router • User Guide
99
Application scenario
Procedures:
Launch a web browser on a device connected to the router and visit
http://hikvisionwifi.local to log in to the web UI of the router.
Navigate to Administration > Remote Web Management.
Tick Enable of Remote Web Management function.
Set Management IP Address to Specific, and enter the IP address of the device that
remotely accesses the web UI, which is 210.76.200.101 in this example.
Enter a port number used to access the router remotely.
Click Save at the bottom of the page.
Configure management IP address
When the configuration is completed, the technical support can access and manage the router by
visiting "http://X.X.X.X:8888" on the computer.
To Next Page
Loading...
