HIKVISION DS-3WR3N User Manual

Wireless Router • User Guide
19
If you use the router for the first time or the router is restored to factory settings, follow the quick
installation guide to configure the internet access. If you want to modify internet parameters or
other settings, you can follow the instruction in this chapter.
By default, the router works in router mode. Under this mode, connect the WAN port of the router
to the internet, connect the LAN ports to user devices and complete the internet settings, then you
can access the internet on these devices.
Parameters are provided by your ISP. Contact your ISP for any doubts.
Set up a PPPoE connection
If the ISP provides you with a PPPoE user name and password, you can choose this connection type
to access the internet. The application scenario is shown below.
Application scenario
WAN

HIKVISION DS-3WR3N Specifications

General

Brand	HIKVISION
Model	DS-3WR3N
Category	Wireless Router
Language	English