Wireless Router • User Guide
46
Set up the guest network
Scenario: A group of friends is going to visit your home.
Goal: Prevent the use of WiFi networks by guests from affecting the network speed of your
computer for work purposes.
Solution: You can configure the guest network function and let your guests use the guest
networks.
Assume that the parameters you are going to set for the guest WiFi network:
- WiFi name for WiFi network: John_Doe.
- WiFi password for WiFi network: Hikvision+245.
Procedures:
Launch a web browser on a device connected to the router and visit
http://hikvisionwifi.local to log in to the web UI of the router.
Navigate to Route Settings > Wireless Settings > Multi SSID and Password.
Set Multi SSID and Password to Enable.
Change the WiFi Name, which is John_Doe in this example.
Set WiFi Password, which is Hikvision+245 in this example.
Click Save at the bottom of the page.
Set up the multi SSID and password
After the configuration, guests can connect their wireless devices, such as smartphones, to
John_Doe to access the internet.
To Next Page
Loading...
Need help?
General
